Call for Price
Pressure flow control Automatic-Reset.
RE-START 2HP foresees N° 9 automatic RE- START cycles attempt after a dry running
The electronic pump controller Re-Start automatically start and stops the pump when opening or closing any tap or valve in the system.
Non return valve built in. In case of dry running the controller will automatically stop the pump.
Auto restart – If there is water failure the controller will stop the pump after 20 seconds running. The controller will then try again to re-start for N° 9 automatic cycles attempts after a dry running and check if water has returned. If there is still no water supply the pump will stop and turn to dry running protection status. After 24 hours the pump will start automatically and repeat the above process.
Complete with a pressure gauge 0-10 Bar.
Product: Flow-Pressure Control ON/OFF
Motor Load: 2HP 250V a.c.
Reset 1: Automatic With n° 9 Different Cycles attempt, The Last One 1 time every 24h
Reset 2: Manual
Starting Pressure: Adjustable 1-3 Bar
Water: Clean Water