Search for:
Welcome Guest [Login | Register]
Shop by Category
Featured Product
Featured Product
Since 1948
Since 1948 till today
Member of LCC
Member of Limassol Chamber of Commerce & Industry
Location: /Fluid Handling/Stuart Turner Ltd

Stuart Turner Showemate S 1.8Bar Twin Pump.

Stuart Turner Showemate S 1.8Bar Twin Pump.

Product Information

Showermate Standard 1.8 bar Twin - Bathroom or shower pump

Showermate Pumps

Showermate Standard pumps are designed to boost the performance of shower and tap outlets within a bathroom.  The range is suitable for positive head applications and all Showermate pumps are simple to install, and are very quiet in operation.

A Showermate Standard 1.8  bar Twinpump is designed to boost the incoming hot and cold water supply to a shower, bath shower mixer or mixer tap.

Technical Specification

General
Product code 46407
Guarantee 3 years
WRAS approval 1207070
Features
Pump type Peripheral
Mechanical seal Nitrile / Carbon / Ceramic
Anti vibration feet  
Flexible hoses 4
Dry run protection  
Performance
Maximum head (closed valve) 1.8 bar
Performance @ 9 l/min 1.5 bar
Performance @ 18 l/min 0.8 bar
Maximum flow 33 l/min
Maximum static inlet pressure 13 metres
Maximum working pressure* 380 kPa (3.8 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity (approx) 0.8 l/min
Connections
Pump connections G ¾ male
Flexible hoses
Connections G ¾ female x 15 mm push-in
200 mm long
Isolating valves on inlet hoses
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 9 l/min and above***
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.8 Amps
Power consumption 405 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IP22
Length 304 mm
Width 132 mm
Height (excluding hoses) 179 mm
Weight (including fittings) 4.7 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

*** Both heads pumping 4.5 l/min and above.

Price: 0.00


Product Code: STUA103
Quantity: Add to Basket
A.PM Petrides & Sons
Popular Products
 
Information
Products: 839
Categories: 69
Prices: Euro
Prices do NOT include VAT. Please add 19% VAT where applicable.
Currency
Visitor Information
Total Visitors: 668935
Viewing Store: 79
Total PageViews: 9029606
Current PageViews: 1023
 

Hosting & Design by Oramatech - Web Solutions